Horizontal Pleated Filter Cartridge for 3M 740B,7000 and 720 Replacement
Horizontal pleated has maximum filtration area. It gets longer service life an higher flow rate than the vertical pleated filter cartridge.
BENEFITS
• High dirt holding capacity, longer service life
• Less cartridge change out to save the labor cost
• O-ring design avoids bypass to ensure the filtration efficiency
• Easy handing results in less manpower
APPLICATIONS
• Municipal water
• Food and beverage
• General industrial
• Power plant water treatment
PRODUCT SPECIFICATIONS
Outside Diameter | 6.5 inch(165mm) |
Filter Media | Polypropylene |
Support/Drainage | Polypropylene (PP) |
End Cap Material | Glass Fiber reinforced PP |
Removal Rating ( µm ) | 0.5, 1,3 5,10,20,50,70, 100 |
Length ( " ) | 40" 60" |
Seal Material | S = Silicone E = EPDM B = NBR F = E-FKM V = Viton |
Maximum Operating Temperature | 80℃ |
Maximum Operation Differential Pressure | 3.0 Bar ，80°C |
Recommended Change out Differential Pressure | 2.4 Bar @ 20°C |
FILTER COMPARISON
1. High Flow System requires 90% fewer cartridges as competitive 2.5" cartridge systems for a given flow rate.
2. High Flow Housings are 33% to 50% smaller than competitively sized housings for a given flow rate.
3. Fewer filters and a user-friendly housing design means faster change-outs than competitively sized systems.
* Comparison assumes fluid viscosity of 1 cp
004 Horizontal Pleated Filter Cartridge for 3M 740B,7000 and 720 Replacement.pdf